Dependence of Mechanical and Magnetic Properties of Hypereutectoid Steel on Excess Cementite Morphology

S. V. Burov; Yu. V. Khudorozhkova

doi:10.17804/2410-9908.2016.6.092-099

S. V. Burov, Yu. V. Khudorozhkova

DEPENDENCE OF MECHANICAL AND MAGNETIC PROPERTIES OF HYPEREUTECTOID STEEL ON EXCESS CEMENTITE MORPHOLOGY

DOI: 10.17804/2410-9908.2016.6.092-099

A set of physical and mechanical properties of the U13 steel depending on the morphology of the excess hypereutectoid cementite phase has been revealed. Excess cementite is represented by globules with uniform or layered distribution, by Widmanstätten type needles and by a cementite network. Samples with layer distribution of globular excess cementite demonstrate a better set of strength and plasticity, whereas the worst set of properties are characteristic of samples with a cementite network. The investigated magnetic properties can serve as a basis for the development of methods for electromagnetic testing of excess cementite morphology and the level of strength of hypereutectoid steels after thermomechanical treatment.

Keywords: cementite, cementite network, Widmanstätten cementite, hypereutectoid steel, structure

References:

Makarov A.V., Kogan L.Kh., Schastlivtsev V.M., Kolobylin Yu.M., Yakovleva I.L., Gorkunov E.S., Tabatchikova T.I. Feasibility of testing hardness and wear resistance of eutectoid high-carbon steels with the structure of thin-plate pearlite by magnetic and electromagnetic methods. Russian Journal of Nondestructive Testing, 2000, vol. 36, no. 8, pp. 539–550.
Chulkina A.A., Ul'Yanov A.I., Arsentieva N.B., Zagainov A.V., Gorkunov E.S., Zadvorkin S.M., Somova V.M. The role of cementite in the formation of magnetic hysteresis properties of plastically deformed high-carbon steels: II. Magnetic properties of patented wire made of steel 70. Russian Journal of Nondestructive Testing, 2006, vol. 42, no. 7, pp. 460–467. DOI: 10.1134/S1061830906070059.
Gorkunov E.S. Magnetic Structural-Phase Analysis as Applied to Diagnosing and Evaluating the Lifetime of Products and Structural Components. Part 1. Diagnostics, Resource and Mechanics of materials and structures, 2015, iss. 1, pp. 6–40. DOI: 10.17804/2410-9908.2015.1.006-040. Available at: http://dream-journal.org/issues/2015-1/2015-1_19.html.
Gorkunov E.S. Magnetic Structural–phase Analysis. Part II. Diagnostics, Resource and Mechanics of materials and structures, 2015, iss. 3, pp. 6–50. DOI: 10.17804/2410-9908.2015.3.006-050. Available at: http://dream-journal.org/issues/2015-3/2015-3_34.html.
Burov S.V., Khudorozhkova Yu.V. Distributional and Morphological Changes in Excess Cementite during Deformation of Hypereutectoid Steels. Diagnostics, Resource and Mechanics of materials and structures, 2015, iss. 6, pp. 80–89. DOI: 10.17804/2410-9908.2015.6.80-89. Available at: http://dream-journal.org/issues/2015-6/2015-6_71.html.
Verhoeven J.D., Gibson E.D. The divorced eutectoid transformation in steel. Metallurgical and Materials Transactions A, 1998, vol. 29A, pp. 1181–1189. DOI: 10.1007/s11661-998-0245-4.
Burov S.V., Khudorozhkova Yu.V., Ryzhkov M.A. Peculiarities of austenite transformation under continuous cooling of hypereutectoid steel. Obrabotka Metallov, 2013, no. 4 (61), pp. 65–70. (In Russian).
Khudorozhkova Yu.V., Burov S.V. Investigation of the structure and magnetic properties of hypereutectoid steel with different carbide phase morphology. AIP Conference Proceedings, 2016, vol. 1785, iss. 1, pp. 040026. DOI: 10.1063/1.4967083. Available at:http://scitation.aip.org/content/aip/proceeding/aipcp/1785?ver=pdfcov.
Plotnikova N.V. Rol morfologii tsementita v obespechenii konstruktivnoy prochnosti uglerodistykh zaevtektoidnykh staley [The Contribution of Cementite Morphology to the Structural Strength of Hypereutectoid Carbon Steels]. PhD thesis synopsis, Novosibirsk, 2004, 19 p. (In Russian).
Sukhanov D.A., Arkhangelskiy L.B., Plotnikova N.V. The morphology of the carbides in high-carbon alloys such as damascus steel. Obrabotka metallov, 2016, no. 4 (73), pp. 43–51. DOI: 10.17212/1994-6309-2016-4-43-51. (In Russian).
Sukhanov D.A., Arkhangelskiy L.B. Damascus steel microstructure. Metallurgist, 2016, vol. 59, iss. 9, pp. 818–822. DOI: 10.1007/s11015-016-0178-x.

С. В. Буров, Ю. В. Худорожкова

ЗАВИСИМОСТЬ МЕХАНИЧЕСКИХ И МАГНИТНЫХ СВОЙСТВ ЗАЭВТЕКТОИДНОЙ СТАЛИ ОТ МОРФОЛОГИИ ИЗБЫТОЧНОГО ЦЕМЕНТИТА

Определен комплекс физико-механических свойств стали У13 с различной морфологией избыточной карбидной фазы – в виде равномерно распределенных глобулей, глобулей с преимущественно слоистым залеганием, в виде остатков видманштеттовых игл и в виде сетки по границам бывшего аустенитного зерна, всего 4 группы образцов. Наилучшим комплексом прочности и пластичности обладают образцы со слоистым распределением глобулярного избыточного цементита (образцы третьей группы), а наихудшим – образцы с цементитной сеткой. Исследование магнитных характеристик дало результаты, которые могут явиться основой для разработки методик электромагнитного контроля морфологии карбидной фазы и уровня механических характеристик углеродистых заэвтектоидных сталей, подвергнутых термомеханичской обработке.

Ключевые слова: цементит, цементитная сетка, видманштеттов цементит, заэвтектоидная сталь, структура

Библиография:

Feasibility of testing hardness and wear resistance of eutectoid high-carbon steels with the structure of thin-plate pearlite by magnetic and electromagnetic methods / A. V. Makarov, L. Kh. Kogan, V. M. Schastlivtsev, Yu. M. Kolobylin, I. L. Yakovleva, E. S. Gorkunov, T. I. Tabatchikova // Russian Journal of Nondestructive Testing. – 2000. – Vol. 36, № 8. – P. 539–550.
The role of cementite in the formation of magnetic hysteresis properties of plastically deformed high-carbon steels: II. Magnetic properties of patented wire made of steel 70 / A. A. Chulkina, A. I. Ul'Yanov, N. B. Arsentieva, A. V. Zagainov, E. S. Gorkunov, S. M. Zadvorkin, V. M. Somova // Russian Journal of Nondestructive Testing. – 2006. – Vol. 42, № 7. – P. 460–467. DOI: 10.1134/S1061830906070059.
Gorkunov E. S. Magnetic Structural-Phase Analysis as Applied to Diagnosing and Evaluating the Lifetime of Products and Structural Components. Part 1 // Diagnostics, Resource and Mechanics of materials and structures. – 2015. – Iss. 1. – P. 6–40. – DOI: 10.17804/2410-9908.2015.1.006-040. – URL: http://dream-journal.org/issues/2015-1/2015-1_19.html.
Gorkunov E. S. Magnetic Structural–phase Analysis. Part II // Diagnostics, Resource and Mechanics of materials and structures. – 2015. – Iss. 3. – P. 6–50. – DOI: 10.17804/2410-9908.2015.3.006-050. – URL: http://dream-journal.org/issues/2015-3/2015-3_34.html.
Burov S. V., Khudorozhkova Yu. V. Distributional and Morphological Changes in Excess Cementite during Deformation of Hypereutectoid Steels // Diagnostics, Resource and Mechanics of materials and structures. – 2015. – Iss. 6. – P. 80–89. – DOI: 10.17804/2410-9908.2015.6.80-89. – URL: http://dream-journal.org/issues/2015-6/2015-6_71.html.
Verhoeven J. D., Gibson E. D. The divorced eutectoid transformation in steel // Metallurgical and Materials Transactions A. – 1998. – Vol. 29A. – P. 1181–1189. – DOI: 10.1007/s11661-998-0245-4.
Буров С. В., Худорожкова Ю. В., Рыжков М. А. Особенности распада аустенита при непрерывном охлаждении перегретой заэвтектоидной стали // Обработка металлов (технология, оборудование, инструменты). – 2013. – № 4 (61). – С. 65–70.
Khudorozhkova Yu. V., Burov S. V. Investigation of the structure and magnetic properties of hypereutectoid steel with different carbide phase morphology // AIP Conference Proceedings. – 2016. – Vol. 1785, iss. 1. – P. 040026. – DOI: 10.1063/1.4967083. – URL: http://dx.doi.org/10.1063/1.4967083.
Плотникова Н. В. Роль морфологии цементита в обеспечении конструктивной прочности углеродистых заэвтектоидных сталей : автореф. дис. … канд. техн. наук. – Новосибирск, 2004. – 19 с.
Суханов Д. А., Архангельский Л. Б., Плотникова Н. В. Морфология избыточной карбидной фазы в высокоуглеродистых сплавах типа булат // Обработка металлов (технология, оборудование, инструменты). – 2016. – № 4 (73). – С. 43–51. – DOI: 10.17212/1994-6309-2016-4-43-51. – ISSN 1994-6309.
Sukhanov D. A., Arkhangelskiy L. B. Damascus steel microstructure // Metallurgist. – 2016. – Vol. 59, iss. 9. – P. 818–822. – DOI: 10.1007/s11015-016-0178-x.

Библиографическая ссылка на статью

Burov S. V., Khudorozhkova Yu. V. Dependence of Mechanical and Magnetic Properties of Hypereutectoid Steel on Excess Cementite Morphology // Diagnostics, Resource and Mechanics of materials and structures. - 2016. - Iss. 6. - P. 92-99. -
DOI: 10.17804/2410-9908.2016.6.092-099. -
URL: http://dream-journal.org/issues/content/article_114.html
(accessed: 21.12.2024).