Электронный научный журнал
 
Diagnostics, Resource and Mechanics 
         of materials and structures
ВыпускиО журналеАвторуРецензентуКонтактыНовостиРегистрация

2024 Выпуск 4

Все выпуски
 
2024 Выпуск 4
 
2024 Выпуск 3
 
2024 Выпуск 2
 
2024 Выпуск 1
 
2023 Выпуск 6
 
2023 Выпуск 5
 
2023 Выпуск 4
 
2023 Выпуск 3
 
2023 Выпуск 2
 
2023 Выпуск 1
 
2022 Выпуск 6
 
2022 Выпуск 5
 
2022 Выпуск 4
 
2022 Выпуск 3
 
2022 Выпуск 2
 
2022 Выпуск 1
 
2021 Выпуск 6
 
2021 Выпуск 5
 
2021 Выпуск 4
 
2021 Выпуск 3
 
2021 Выпуск 2
 
2021 Выпуск 1
 
2020 Выпуск 6
 
2020 Выпуск 5
 
2020 Выпуск 4
 
2020 Выпуск 3
 
2020 Выпуск 2
 
2020 Выпуск 1
 
2019 Выпуск 6
 
2019 Выпуск 5
 
2019 Выпуск 4
 
2019 Выпуск 3
 
2019 Выпуск 2
 
2019 Выпуск 1
 
2018 Выпуск 6
 
2018 Выпуск 5
 
2018 Выпуск 4
 
2018 Выпуск 3
 
2018 Выпуск 2
 
2018 Выпуск 1
 
2017 Выпуск 6
 
2017 Выпуск 5
 
2017 Выпуск 4
 
2017 Выпуск 3
 
2017 Выпуск 2
 
2017 Выпуск 1
 
2016 Выпуск 6
 
2016 Выпуск 5
 
2016 Выпуск 4
 
2016 Выпуск 3
 
2016 Выпуск 2
 
2016 Выпуск 1
 
2015 Выпуск 6
 
2015 Выпуск 5
 
2015 Выпуск 4
 
2015 Выпуск 3
 
2015 Выпуск 2
 
2015 Выпуск 1

 

 

 

 

 

D. I. Vichuzhanin, S. V. Smirnov, N. B. Pugacheva, A. V. Nesterenko, P. A. Polyakov

THE EFFECT OF THE STRESS STATE ON THE DEFORMABILITY OF AN ALUMINUM MATRIX COMPOSITE WITH 10 VOL% SiC PARTICLE FILLER

DOI: 10.17804/2410-9908.2024.4.006-023

The effect of the stress state on the deformability of an aluminum matrix composite with 10 vol% of SiC particles is studied by using the damage criterion. Backward extrusion of a standard cup-shaped part is used as an example. The process is simulated by the finite element method to evaluate the stress-strain state and damage. It has been found that, in order to make a high-quality product, it is necessary to carry out extrusion under all-round compression at near-solidus temperatures. A laboratory die was designed and manufactured for the experimental verification of the simulation results. The die is peculiar in that the value of compressive stresses can be controlled during deformation. The extrusion process yields a defect-free product. It has been revealed that heating to near-solidus temperature breaks the initial cellular structure of the composite under external loading.

Acknowledgements: The study was carried out in accordance with the state assignment for the Institute of Engi-neering Science UB RAS, theme No. 124020700063-3. The equipment of the Plastometriya shared research facilities (IES UB RAS) was used in the tests. The simulations were performed with the application of the software installed at the Laboratory of Structural Methods of Analysis and Prop-erties of Materials and Nanomaterials of the shared research facilities affiliated to the Ural Federal University.

Keywords: damage, fracture locus, aluminum matrix composite, silicon carbide

Bibliography:

  1. Pramanik, A. and Basak, A.K. Fracture and fatigue life of Al-based MMCs machined at different conditions. Engineering Fracture Mechanics, 2018, 191, 33–45. DOI: 10.1016/j.engfracmech.2018.01.013.
  2. Huang, S.-J. and Ali, A.N. Effects of heat treatment on the microstructure and microplastic deformation behavior of SiC particles reinforced AZ61 magnesium metal matrix composite. Materials Science and Engineering: A, 2018, 711, 670–682. DOI: 10.1016/j.msea.2017.11.020.
  3. Kurganova, Yu.A., Kolmakov, A.G., Chen, I., and Kurganov, S.V. Study of mechanical characteristics of advanced aluminum-matrix composites reinforced with SiC and Al2O3. Inorganic Materials: Applied Research, 2022, 13, 157–160. DOI: 10.1134/S2075113322010245.
  4. Gladkovskii, S.V., Petrova, S.V., Cherkasova, T.S., and Patselov, A.M. Structure, physical and mechanical properties of aluminum matrix composites reinforced with carbide particles. Metal Science and Heat Treatment, 2023, 65, 54–61. DOI: 10.1007/s11041-023-00891-5.
  5. Munasir, N., Triwikantoro, T., Zainuri, M., Bäßler, R., and Darminto, D. Corrosion polarization behavior of Al–SiO2 composites in 1M and related microstructural analysis. International Journal of Engineering, 2019, 32 (7), 982–990. DOI: 10.5829/ije.2019.32.07a.11.
  6. Dixit, S., Mahata, A., Mahapatra, D.R., Kailas, S.V., and Chattopadhyay, K. Multi-layer graphene reinforced aluminum – manufacturing of high strength composite by friction stir alloying. Composites Part B: Engineering, 2018, 136, 63–71. DOI: 10.1016/j.compositesb.2017.10.028.
  7. Hu, Z., Chen, F., Xu, J., Nian, Q., Lin, D., Chen, C., Zhu, X., Chen, Y., and Zhang, M. 3D printing graphene-aluminum nanocomposites. Journal of Alloys and Compounds, 2018, 746, 269–276. DOI: 10.1016/j.jallcom.2018.02.272.
  8. Ogawa, F. and Masuda, C. Fabrication and the mechanical and physical properties of nanocarbon-reinforced light metal matrix composites: a review and future directions. Materials Science and Engineering: A, 2021, 820, 141542. DOI: 10.1016/j.msea.2021.141542.
  9. Ma, J., Kang, J., and Huang, T. Novel application of ultrasonic cavitation for fabrication of TiN/Al composites. Journal of Alloys and Compounds, 2016, 661, 176–181. DOI: 10.1016/j.jallcom.2015.11.159.
  10. Tan, Z., Li, Z., Fan, G., Kai, X., Ji, G., Zhang, L., and Zhang, D. Diamond/aluminum composites processed by vacuum hot pressing: microstructure characteristics and thermal properties. Diamond and Related Materials, 2013, 31, 1–5. DOI: 10.1016/j.diamond.2012.10.008.
  11. Bharath, V., Nagaral, M., Auradi, V., and Kori, S.A. Preparation of 6061 Al–Al2O3 MMC’s by stir casting evaluation of mechanical and wear properties. Procedia Materials, 2014, 6, 1658. DOI: 10.1016/j.mspro.2014.07.151.
  12. Yolshina, L.A., Kvashnichev, A.G., Vichuzhanin, D.I., and Smirnova, E.O. Mechanical and thermal properties of aluminum matrix composites reinforced by in situ Al2O3 nanoparticles fabricated via direct chemical reaction in molten salts. Applied Sciences, 2022, 12, 8907. DOI: 10.3390/app12178907.
  13. Kumar, D., Angra, S., and Singh, S. Mechanical properties and wear behavior of stir cast aluminum metal matrix composite: a review. International Journal of Engineering, 2022, 35 (4), 794–801. DOI: 10.5829/ije.2022.35.04a.19.
  14. Najimi, A.A. and Shahverdi, H.R. Microstructure and mechanical characterization of Al6061-CNT nanocomposites fabricated by spark plasma sintering. Materials Characterization, 2017, 133, 44–53. DOI: 10.1016/j.matchar.2017.09.028.
  15. Chen, B., Shen, J., Ye, X., Jia, L., Li, S., Umeda, J., Takahashi, M., and Kondoh, K. Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites. Acta Materialia, 2017, 140, 317–325. DOI: 10.1016/j.actamat.2017.08.048.
  16. Gao, X., Yue, H., Guo, E., Zhang, H., Lin, X., Yao, L., and Wang, B. Preparation and tensile properties of homogeneously dispersed graphene reinforced aluminum matrix composites. Materials & Design, 2016, 94, 54–60. DOI: 10.1016/j.matdes.2016.01.034.
  17. Çiçek, O., Uslu Tecimer, H., Tan, S.O., Tecimer, H., Orak, İ., and Altındal Ş. Synthesis and characterization of pure and graphene (Gr)-doped organic/polymer nanocomposites to investigate the electrical and photoconductivity properties of Au/n-GaAs structures. Composites Part B: Engineering, 2017, 113, 14–23. DOI: 10.1016/j.compositesb.2017.01.012.
  18. Liu, J., Zhang, Z., Lv, Y., Yan, J., Yun, J., Zhao, W., Kou, L., and Zhai, C. Synthesis and characterization of ZnO NWAs/graphene composites for enhanced optical and field emission performances. Composites Part B: Engineering, 2016, 99, 336–372. DOI: 10.1016/j.compositesb.2016.05.036.
  19. Bozkurt, Y. and Boumerzong, Z. Tool material effect on the friction stir butt welding of AA2124-T4 alloy matrix MMC. Journal of Materials Research and Technology, 2018, 7 (1), 29–38. DOI: 10.1016/j.jmrt.2017.04.001.
  20. Zhang, X., Chen, Y., and Hu, J. Recent advances in the development of aerospace materials. Progress in Aerospace Sciences, 2018, 97, 22–34. DOI: 10.1016/J.PAEROSCI.2018.01.001.
  21. Yusof, N.S.B., Sapuan, S.M., Sultan, M.T.H., Jawaid, M., and Maleque, M.A. Design and materials development of automotive crash box: a review. Ciência & Tecnologia dos Materiais, 2017, 29 (3), 129–144. DOI: 10.1016/j.ctmat.2017.09.003.
  22. Hamza, M. and Mondal, S. Effect of reinforcement with ceramic microparticles on structure and properties of composites with an aluminum matrix. Metal Science and Heat Treatment, 2022, 64 (3), 163–166. DOI: 10.1007/s11041-022-00778-x.
  23. Adetunla, А. and Akinlabi, Е. Fabrication of aluminum matrix composites for automotive industry via multipass friction stir processing technique. International Journal of Automotive Technology, 2019, 20 (6), 1079–1088. DOI: 10.1007/s12239-019-0101-0.
  24. Cao, T.S. Models for ductile damage and fracture prediction in cold bulk metal forming processes: a review. International Journal of Material Forming, 2015, 10 (2), 1–33. DOI: 10.1007/s12289-015-1262-7.
  25. Bogatov, A.A., Mizhiritsky, O.I., and Smirnov S.V. Resurs plastichnosti metallov pri obrabotke davleniem [Metal Plasticity Resource Under Metal Forming]. Metallurgiya Publ., Moscow, 1984, 144 p. (In Russian).
  26. Bai, Y. and Wierzbicki, T. A new model of metal plasticity and fracture with pressure and Lode dependence. International Journal of Plasticity, 2008, 24 (6), 1071–1096. DOI: 10.1016/j.ijplas.2007.09.004.
  27. Xue, L. Stress based fracture envelope for damage plastic solids. Engineering Fracture Mechanics, 2009, 76, 419–438. DOI: 10.1016/j.engfracmech.2008.11.010.
  28. Khan, A.S. and Liu, H. A new approach for ductile fracture prediction on Al 2024–T351 alloy. International Journal of Plasticity, 2012, 35, 1–12. DOI: 10.1016/j.ijplas.2012.01.003.
  29. Malcher, L. and Mamiya, E.N. An improved damage evolution law based on continuum damage mechanics and its dependence on both stress triaxiality and the third invariant. International Journal of Plasticity, 2014, 56, 232–261. DOI: 10.1016/j.ijplas.2014.01.002.
  30. Kolmogorov, V.L., Shishmintsev, V.F., and Matveev, G.A. Ultimate deformability of metals tensile-tested to failure under hydrostatic pressure. Physics of Metals and Metallography, 1967, 23 (1), 170–171.
  31. Rahmanifard, R., Akhlaghi, F. Effect of extrusion temperature on the microstructure and porosity of A356SiCp composites. Journal of Materials Processing Technology, 2007, 187–188, 433–436. DOI: 10.1016/j.jmatprotec.2006.11.077.
  32. Jia, Y. and Bai, Y. Ductile fracture prediction for metal sheets using all-strain based anisotropic eMMC model. International Journal of Mechanical Sciences, 2016, 115–116, 516–531. DOI: 10.1016/j.ijmecsci.2016.07.022.
  33. Vichuzhanin, D.I., Khotinov V.A., and Smirnov, S.V. The effect of the stress state on the ultimate plasticity of steel X80. Diagnostics, Resource and Mechanics of materials and structures, 2015, 1, 73–89. DOI: 10.17804/2410-9908.2015.1.073-089. Available at: http://dream-journal.org/issues/2015-1/2015-1_21.html
  34. Kovka i shtampovka, t. 2: Goryachaya obyemnaya shtampovka [Forging and Stamping, Semenova, E.I., ed., Hot Volume Stamping, vol. 2]. Mashinostroenie Publ., Moscow, 2010, 720 p. (In Russian).
  35. Vichuzhanin, D.I., Smirnov, S.V., Nesterenko, A.V., and Igumnov, A.S. A fracture locus for a 10 volume-percent B95/SiC metal matrix composite at the near-solidus temperature. Letters on Materials, 2018, 8 (1), 88–93. DOI: 10.22226/2410-3535-2018-1-88-93.
  36. Pugacheva, N.B., Michurov, N.S., Senaeva, E.I., and Bykova, T.M. Structure and thermophysical properties of aluminum-matrix composites. The Physics of Metals and Metallography, 2016, 117 (11), 1144–1151. DOI: 10.1134/S0031918X16110119.
  37. Iwasaki, H., Takeuchi, M., Mori, T., Mabuchi, M., and Higashi, K. A comparative study of cavitation characteristics in composite and 7475 aluminum alloy. Scripta Metallurgica et Materialia, 1994, 31 (3), 255–260. DOI: 10.1016/0956-716x(94)90279.
  38. Mabuchi, M., Higashi, K., and Langdon, T.G. An investigation of the role of a liquid phase in Al Cu Mg metal matrix composites exhibiting high strain rate superplasticity. Acta Metallurgica et Materialia, 1994, 42 (5), 1739–1745. DOI: 10.1016/0956-7151(94)90384-0.
  39. Grudev, А.P., Zilberg, Yu.V., and Tilik, V.T. Trenie i smazki pri obrabotke metallov davleniem [Friction and Lubricants in Metal Forming by Pressure: Reference Book]. Metallurgiya Publ., Moscow, 1982, 312 p. (In Russian).
  40. Pugacheva, N.B., Malygina, I.Yu., Michurov, N.S., Senaeva, E.I., and Antenorova, N.P. Effect of heat treatment on the structure and phase composition of aluminum matrix composites containing silicon carbide. Diagnostics, Resource and Mechanics of materials and structures, 2017, 6, 28–36. DOI: 10.17804/2410-9908.2017.6.028-036. Available at: http://dream-journal.org/issues/2017-6/2017-6_161.html
  41. Pugacheva, N.B. and Senaeva, E.I. Influence of Al/SiC composite structure on corrosion damages nature. AIP Conf. Proc., 2016, 1785, 040049. DOI: 10.1063/1.4967106.

Д. И. Вичужанин, С. В. Смирнов, Н. Б. Пугачева, А. В. Нестеренко, П. А. Поляков

ДЕФОРМИРУЕМОСТЬ АЛЮМОМАТРИЧНОГО КОМПОЗИТА В95/10%SiC ПРИ ОБРАТНОМ ВЫДАВЛИВАНИИ

С использованием критерия поврежденности выполнено исследование влияния напряженного состояния на деформационную способность алюмоматричного композита В95/10%SiC на примере обратного выдавливания типовой детали «стакан». Для оценки напряженно-деформированного состояния и поврежденности в процессе выдавливания выполнено моделирование процесса методом конечных элементов. Установлено, что для получения качественного изделия необходимо осуществлять выдавливание в условиях всестороннего сжатия при околосолидусной температуре. Для экспериментальной проверки результатов моделирования спроектирован и изготовлен лабораторный штамп, особенностью которого является возможность регулирования величины сжимающих напряжений в процессе деформации. Получено бездефектное изделие при выдавливании. Установлено, что нагрев до околосолидусной температуры способствует разбиению первоначальной ячеистой структуры композита при внешнем нагружении.

Благодарности: Работа выполнена в соответствии с государственным заданием ИМАШ УрО РАН № 124020700063-3. Испытания проведены на оборудовании ЦКП «Пластометрия» ИМАШ УрО РАН. При проведении моделирования использовано программное обеспечение лабора-тории структурных методов анализа и свойств материалов и наноматериалов ЦКП УрФУ.

Ключевые слова: поврежденность, диаграмма предельной пластичности, алюмоматричный композит, карбид кремния

Библиография:

  1. Pramanik A., Basak A. K. Fracture and fatigue life of Al-based MMCs machined at different conditions // Engineering Fracture Mechanics. – 2018. – Vol. 191.– P. 33–45. – DOI: 10.1016/j.engfracmech.2018.01.013.
  2. Huang S.-J., Ali A. N. Effects of heat treatment on the microstructure and microplastic deformation behavior of SiC particles reinforced AZ61 magnesium metal matrix composite // Materials Science and Engineering: A. – 2018. – Vol. 711. – P. 670–682. – DOI: 10.1016/j.msea.2017.11.020.
  3. Study of mechanical characteristics of advanced aluminum–matrix composites reinforced with SiC and Al2O3 / Yu. A. Kurganova, A. G. Kolmakov, I. Chen, S. V. Kurganov // Inorganic Materials: Applied Research. – 2022. – Vol. 13. – P. 157–160. – DOI: 10.1134/S2075113322010245.
  4. Structure, physical and mechanical properties of aluminum matrix composites reinforced with carbide particles / S. V. Gladkovskii, S. V. Petrova, T. S. Cherkasova, A. M. Patselov // Metal Science and Heat Treatment. – 2023. – Vol. 65. – P. 54–61. – DOI: 10.1007/s11041-023-00891-5.
  5. Corrosion polarization behavior of Al–SiO2 composites in 1M and related microstructural analysis / N. Munasir, T. Triwikantoro, M. Zainuri, R. Bäßler, D. Darminto // International Journal of Engineering. – 2019. – Vol. 32 (7). – P. 982–990. – DOI: 10.5829/ije.2019.32.07a.11.
  6. Multi-layer graphene reinforced aluminum – manufacturing of high strength composite by friction stir alloying / S. Dixit, A. Mahata, D. R. Mahapatra, S. V. Kailas, K. Chattopadhyay // Composites Part B: Engineering. – 2018. – Vol. 136. – P. 63–71. – DOI: 10.1016/j.compositesb.2017.10.028.
  7. 3D printing graphene-aluminum nanocomposites / Z. Hu, F. Chen, J. Xu, Q. Nian, D. Lin, Ch. Chen, X. Zhu, Y. Chen, M. Zhang // Journal of Alloys and Compounds. – 2018. – Vol. 746. – P. 269–276. – DOI: 10.1016/j.jallcom.2018.02.272.
  8. Ogawa F., Masuda C. Fabrication and the mechanical and physical properties of nanocarbon-reinforced light metal matrix composites: a review and future directions // Materials Science and Engineering: A. – 2021. – Vol. 820. – P. 141542. – DOI: 10.1016/j.msea.2021.141542.
  9. Ma J., Kang J., Huang T. Novel application of ultrasonic cavitation for fabrication of TiN/Al composites // Journal of Alloys and Compounds. – 2016. – Vol. 661. – P. 176–181. – DOI: 10.1016/j.jallcom.2015.11.159.
  10. Diamond/aluminum composites processed by vacuum hot pressing: microstructure characteristics and thermal properties / Z. Tan, Z. Li, G. Fan, X. Kai, G. Ji, L. Zhang, D. Zhang // Diamond and Related Materials. – 2013. – Vol. 31. – P. 1–5. – DOI: 10.1016/j.diamond.2012.10.008.
  11. Preparation of 6061 Al–Al2O3 MMC’s by stir casting evaluation of mechanical and wear properties / V. Bharath, M. Nagaral, V. Auradi, S. A. Kori // Procedia Materials Science. – 2014. – Vol. 6. – P. 1658–1667. – DOI: 10.1016/j.mspro.2014.07.151.
  12. Mechanical and thermal properties of aluminum matrix composites reinforced by in situ Al2O3 nanoparticles fabricated via direct chemical reaction in molten salts / L. A. Yolshina, A. G. Kvashnichev, D. I. Vichuzhanin, E. O. Smirnova // Applied Sciences. – 2022. – Vol. 12 (17). – P. 8907. – DOI: 10.3390/app12178907.
  13. Kumar D., Angra S., Singh S. Mechanical properties and wear behavior of stir cast aluminum metal matrix composite: a review // International Journal of Engineering. – 2022. – Vol. 35 (4). – P. 794–801. – DOI: 10.5829/ije.2022.35.04a.19.
  14. Najimi A. A., Shahverdi H. R. Microstructure and mechanical characterization of Al6061-CNT nanocomposites fabricated by spark plasma sintering // Materials Characterization. – 2017. – Vol. 133. – P. 44–53. – DOI: 10.1016/j.matchar.2017.09.028.
  15. Equilibrium composition variation of Q-phase precipitates in aluminum alloys / B. Chen, J. Shen, X. Ye, L. Jia, S. Li, J. Umeda, M. Takahashi, K. Kondoh // Acta Materialia. – 2017. – Vol. 140. – P. 317–325. – DOI: 10.1016/j.actamat.2017.08.048.
  16. Preparation and tensile properties of homogeneously dispersed graphene reinforced aluminum matrix composite / X. Gao, H. Yue, E. Guo, H. Zhang, X. Lin, L. Yao, B. Wang // Materials & Design. – 2016. – Vol. 94. – P. 54–60. – DOI: 10.1016/j.matdes.2016.01.034.
  17. Synthesis and characterization of pure and graphene (Gr)-doped organic/polymer nanocomposites to investigate the electrical and photoconductivity properties of Au/n-GaAs structures / O. Çiçek, H. Uslu Tecimer, S. O. Tan, H. Tecimer, İ. Orak, Ş. Altındal // Composites Part B: Engineering. – 2017. – Vol. 113. – P. 14–23. – DOI: 10.1016/j.compositesb.2017.01.012.
  18. Synthesis and characterization of ZnO NWAs/graphene composites for enhanced optical and field emission performances / J. Liu, Z. Zhang, Y. Lv, J. Yan, J. Yun, W. Zhao, L. Kou, C. Zhai // Composites Part B: Engineering. – 2016. – Vol. 99. – P. 336–372. – DOI: 10.1016/j.compositesb.2016.05.036.
  19. Bozkurt Y., Boumerzong Z. Tool material effect on the friction stir butt welding of AA2124-T4 alloy matrix MMC // Journal of Materials Research and Technology. – 2018. – Vol. 7 (1). – P. 29–38. – DOI: 10.1016/j.jmrt.2017.04.001.
  20. Zhang X., Chen Y., Hu J. Recent advances in the development of aerospace materials // Progress in Aerospace Sciences. – 2018. – Vol. 97. – P. 22–34. – DOI: 10.1016/j.paerosci.2018.01.001.
  21. Design and materials development of automotive crash box: a review / N. S. B. Yusof, S. M. Sapuan, M. T. H. Sultan, M. Jawaid, M. A. Maleque // Ciência & Tecnologia dos Materiais. – 2017. – Vol. 29 (3). – P. 129–144. – DOI: 10.1016/j.ctmat.2017.09.003.
  22. Hamza M., Mondal S. Effect of reinforcement with ceramic microparticles on structure and properties of composites with an aluminum matrix // Metal Science and Heat Treatment. – 2022. – Vol. 64 (3). – P. 163–166. – DOI: 10.1007/s11041-022-00778-x.
  23. Adetunla А., Akinlabi Е. Fabrication of aluminum matrix composites for automotive industry via multipass friction stir processing technique // International Journal of Automotive Technology. – 2019. – Vol. 20 (6). – P. 1079–1088. – DOI: 10.1007/s12239-019-0101-0.
  24. Cao T. S. Models for ductile damage and fracture prediction in cold bulk metal forming processes: a review // International Journal of Material Forming. – 2015. – Vol. 10 (2). – P. 1–33. – DOI: 10.1007/s12289-015-1262-7.
  25. Богатов А. А, Мижирицкий О. И., Смирнов С. В. Ресурс пластичности металлов при обработке давлением. – М. : Металлургия, 1984. – 144 c.
  26. Bai Y., Wierzbicki T. A new model of metal plasticity and fracture with pressure and Lode dependence // International Journal of Plasticity. – 2008. – Vol. 24 (6). – P. 1071–1096. – DOI: 10.1016/j.ijplas.2007.09.004.
  27. Xue L. Stress based fracture envelope for damage plastic solids // Engineering Fracture Mechanics. – 2009. – Vol. 76 (3). – P. 419–438. – DOI: 10.1016/j.engfracmech.2008.11.010.
  28. Khan A. S., Liu H. A new approach for ductile fracture prediction on Al 2024–T351 alloy // International Journal of Plasticity. – 2012. – Vol. 35. – P. 1–12. – DOI: 10.1016/j.ijplas.2012.01.003.
  29. Malcher L., Mamiya E. N. An improved damage evolution law based on continuum damage mechanics and its dependence on both stress triaxiality and the third invariant // International Journal of Plasticity. – 2014. – Vol. 56. – P. 232–261. – DOI: 10.1016/j.ijplas.2014.01.002.
  30. Kolmogorov V. L., Shishmintsev V. F., Matveev G. A. Ultimate deformability of metals tensile-tested to failure under hydrostatic pressure // Physics of Metals and Metallography. – 1967. – Vol. 23 (1). – P. 170–171.
  31. Rahmanifard R., Akhlaghi F. Effect of extrusion temperature on the microstructure and porosity of A356SiCp composites // Journal of Materials Processing Technology. – 2007. – Vols. 187–188. – P. 433–436. – DOI: 10.1016/j.jmatprotec.2006.11.077.
  32. Jia Y., Bai Y. Ductile fracture prediction for metal sheets using all-strain-based anisotropic eMMC model // International Journal of Mechanical Sciences. – 2016. – Vols. 115–116. – P. 516–531. – DOI: 10.1016/j.ijmecsci.2016.07.022.
  33. Vichuzhanin D. I., Khotinov V. A., Smirnov S. V. The effect of the stress state on the ultimate plasticity of steel X80 // Diagnostics, Resource and Mechanics of materials and structures. – 2015. – Iss. 1. – P. 73–89. – DOI: 10.17804/2410-9908.2015.1.073-089. – URL: http://dream-journal.org/issues/2015-1/2015-1_21.html
  34. Ковка и штамповка : справочник : в 4 т. Т. 2. Горячая объемная штамповка / под общ. ред. Е. И. Семенова. – 2-е изд., перераб. и доп.– М. : Машиностроение, 2010. – 720 с.
  35. A fracture locus for a 10 volume-percent B95/SiC metal matrix composite at the near-solidus temperature / D. I. Vichuzhanin, S. V. Smirnov, A. V. Nesterenko, A. S. Igumnov // Letters on Materials. – 2018. – Vol. 8 (1). – P. 88–93. – DOI: 10.22226/2410-3535-2018-1-88-93.
  36. Structure and thermophysical properties of aluminum-matrix composites / N. B. Pugacheva, N. S. Michurov, E. I. Senaeva, T. M. Bykova // The Physics of Metals and Metallography. – 2016. – Vol. 117 (11). – P. 1144–1151. – DOI: 10.1134/S0031918X16110119.
  37. A comparative study of cavitation characteristics in composite and 7475 aluminum alloy / H. Iwasaki, M. Takeuchi, T. Mori, M. Mabuchi, K. Higashi // Scripta Metallurgica et Materialia. – 1994. – Vol. 31 (3). – P. 255–260. – DOI: 10.1016/0956-716x(94)90279.
  38. Mabuchi M., Higashi K., Langdon T. G. An investigation of the role of a liquid phase in Al Cu Mg metal matrix composites exhibiting high strain rate superplasticity // Acta Metallurgica et Materialia. – 1994. – Vol. 42 (5). – P. 1739–1745. – DOI: 10.1016/0956-7151(94)90384-0.
  39. Грудев А. П., Зильберг Ю. В., Тилик В. Т. Трение и смазки при обработке металлов давлением. – М. : Металлургия, 1982. – 312 с.
  40. Effect of heat treatment on the structure and phase composition of aluminum matrix composites containing silicon carbide / N. B. Pugacheva, I. Yu. Malygina, N. S. Michurov, E. I. Senaeva, N. P. Antenorova // Diagnostics, Resource and Mechanics of materials and structures. – 2017. – Iss. 6. – P. 28–36. – DOI: 10.17804/2410-9908.2017.6.028-036. – URL: http://dream-journal.org/issues/2017-6/2017-6_161.html
  41. Pugacheva N. B., Senaeva E. I. Influence of Al/SiC composite structure on corrosion damages nature // AIP Conf. Proc. – 2016. – Vol. 1785. – P. 040049. – DOI: 10.1063/1.4967106.

PDF      

Библиографическая ссылка на статью

The Effect of the Stress State on the Deformability of An Aluminum Matrix Composite with 10 Vol% Sic Particle Filler / D. I. Vichuzhanin, S. V. Smirnov, N. B. Pugacheva, A. V. Nesterenko, P. A. Polyakov // Diagnostics, Resource and Mechanics of materials and structures. - 2024. - Iss. 4. - P. 6-23. -
DOI: 10.17804/2410-9908.2024.4.006-023. -
URL: http://dream-journal.org/issues/2024-4/2024-4_456.html
(accessed: 27.09.2024).

 

импакт-фактор
РИНЦ 0.42

категория К2
в перечне ВАК

МРДМК 2024
ЦКП Пластометрия
НЭБ РИНЦ
Google Scholar


РНБ
Лань

 

Учредитель:  Федеральное государственное бюджетное учреждение науки Институт машиноведения имени Э.С. Горкунова Уральского отделения Российской академии наук
Главный редактор:  С.В.Смирнов
При цитировании ссылка на Электронный научно-технический журнал "Diagnostics, Resource and Mechanics of materials and structures" обязательна. Воспроизведение материалов в электронных или иных изданиях без письменного разрешения редакции запрещено. Опубликованные в журнале материалы могут использоваться только в некоммерческих целях.
Контакты  
 
Главная E-mail 0+
 

ISSN 2410-9908 Регистрация СМИ в Роскомнадзоре Эл № ФС77-57355 от 24 марта 2014 г. © ИМАШ УрО РАН 2014-2024, www.imach.uran.ru